Sick of listening to the radio in your car? With the proper equipment, you can take your entire iPad music library with you on the road. If you have a Bluetooth-enabled stereo, you don't even need any wires. If you have an older car, there are still several ways you can get your music playing through your car speakers.
Ensure your car stereo is compatible. You'll need a
car stereo that supports Bluetooth devices and audio. Many newer stereos
do this, but if you have an older car you may need to install a new stereo first or use one of the other methods in this article.
Your car stereo must support the A2DP Bluetooth profile in order to play back music from your iPad.
If your stereo has an auxiliary jack but no Bluetooth support, you
can use a Bluetooth dongle that connects to the auxiliary jack.
2、 Open the Settings app on your iPad.
3、 Tap "Bluetooth" then tap the Bluetooth slider to toggle it on.
4、 Open the "Setup" menu on your car stereo. This process will vary significantly depending on the stereo brand and car manufacturer.
5、 Select the "Phone" option. Even though you are connecting your iPad, select the "Phone" option.
6、 Select "Pair". This will make the stereo begin searching for your iPad's Bluetooth signal.
7、 Select your stereo or car from your iPad's Bluetooth menu. It should appear in the list of available devices.
8、 Enter the PIN shown in the stereo's display. This is usually 0000.
Wait for the connection to be made. This may take a few moments. You should see a message on your car stereo informing you that the connection has been made.
Start playing music. Now that your iPad is connected,
you can start playing music on your car stereo. You will need to switch
to the AUX or Bluetooth input.